Wall Column Formwork

SBPL Circular Column Formwork

Wall Column Formwork

SBPL Circular Column Formwork

The SBPL circular column formwork has been designed for forming columns with circular cross-sections. To form a curved stop-end or oval column, the system can be combined with a pouring platform as well as a standing bracket.

The system consists of two semicircular formwork halves, with standard diameters from 30 cm up to 130 in a 10 cm grid. The semicircular elements are fixed to each other by means of integrated connectors (no additional fixation elements are required).

The system can be combined by means of vertical stacking to assemble any height required. 3 heights of elements are available, 150 cm, 200 cm, 250 cm and 300 cm, which can be combined by means of vertical stacking to assemble any height required.

  • Upto 150 kN/m2 permitted pressure of fresh concrete
  • Having only 4 standard elements heights and 11 standard diameters in a 10 cm grid provides much easier planning and forming
  • Any custom size up to 600 cm in diameter can be produced on enquiry.
  • All the connectors are integrated and accessories are easily fixed into the slots and quickly tighten, consequently forming time is efficient and maximized.
  • Fast concreting operations.
  • Installation of pre-assembled units minimizes use of a crane.
  • For a column forming only 2 pre-assembled units are used meaning that forming and stripping time are optimized.
  • High durability resulting in lower the expense.
  • Low cleaning cost and restoration.
  • Galvanized or powder-coated steel formwork, for long service life.
  • High quality of concrete finish minimizes finishing work (architectural concrete surface)
  • Accessories such as — wall brackets, supporting struts etc. make for save and easier handling of the system.

Elements diameters

  • There are 11 standard diameters of the semicircular formwork elements from 30 cm up to 130 cm in a 10 cm grid. D = 30, 40, 50, 60, 70, 80, 90, 100, 110, 120, 130 cm.
  • Any custom size up to 600 cm in diameter can be produced on enquiry.

Elements heights

  • There are 4 standard heights of the semicircular formwork elements 150 cm, 200 cm, 250 cm and 300 cm, which can be easily assembled, by means of vertical staking, to a formwork element of any height required.
Skip to content